Characterization Reports

This report communicates the conditions, results, and procedural methods used to achieve a quantified test of interoperation between a Virtex™-5 GTP transceiver and a Virtex-4 RocketIO™ MGT.

This report communicates the conditions, results, and procedural methods used to achieve a quantified test of interoperation between a Virtex™-5 GTP transceiver and a Virtex-II Pro RocketIO™ MGT.

This report describes the electrical performance characterization testing of the Virtex™-5 RocketIO™ GTP transceiver against the Serial ATA Generation 2 (3 Gb/s) specification.

This report describes the electrical performance characterization testing of the Virtex™-5 RocketIO™ GTP transceiver against the Fibre Channel specifications.

This document provides vendor compatibility information for the System ACE™ CompactFlash (XCCACE-TQ144) controller.

This report characterizes the performance of RocketIO™ Multi-Gigabit Transceivers (MGTs) over Category 5, Category 5E, and Category 6 cables. The test cases are chosen to reveal the capabilities and limitations of each type of cable in terms of data rate and cable length..

This document presents characterization data taken on Virtex™-II Pro devices to verify the performance of the RocketIO™ MGTs with respect to industry standards and the product specification.

This document describes techniques to use FPGA logic to implement this oversampling circuitry. It also shows the test results from actual implementations of this circuitry used to verify the stability of the design. These techniques can be used with both an embedded FPGA SERDES as well as a SERDES that is external to the FPGA, and can also be applied to an ASIC-based oversampling design.

This characterization report documents the verification and characterization results of the RocketIO transceiver for stepping -0 of Virtex-II Pro X XC2VPX20 FPGAs.

This report characterizes the performance of RocketIO™ MGTs over Serial ATA (SATA) cables. The test cases are chosen to reveal the capabilities and limitations of the cable in terms of data rate and cable length.

This report characterizes the performance of RocketIO™ MGTs over Infiniband cables. The test cases are chosen to reveal the capabilities and limitations of the cable in terms of data rate and cable length.

This report describes the electrical performance characterization testing of the Virtex™-5 GTP transceiver against the Common Public Radio Interface (CPRI) specifications.

This report describes the electrical performance characterization testing of the GTP transceiver against the PCI Express specifications.

This report describes the electrical performance characterization testing of the GTP transceiver against the OC-48 specifications.

This report describes the electrical performance characterization testing of the GTP transceiver against the 10 Gb Attachment Unit Interface (XAUI) specification.

This report describes the electrical performance characterization testing of the GTP transceiver against the Gigabit Ethernet serial protocol standards.

This report documents the results of characterization performed on the Virtex™-5 Clock Management Tile(CMT) that combines two enhanced Digital Clock Managers (DCMs) with one Phase-Locked Loop (PLL), and clocking resources.

This characterization report provides FPGA characterization results for Virtex®-5 LXT and SXT RocketIO™ GTP transceivers across specified process, voltage, and temperature (PVT) conditions.

This characterization report provides design verification and characterization results for Virtex™-4 FX RocketIO™ Multi-Gigabit Transceivers (MGTs) using process, voltage, and temperature (PVT) conditions.