10.1 |
1302 |
0012h |
March 2008 |
- Applies to USB cable model DLC9G, DLC9LP and FX2LP based starter kits
(e.g., Spartan® 3A FPGA Starter Kit, etc.).
- Adds LED blinking for multiple cable management.
- Incorporates all features of 1301.
- Windows and Linux operating systems.
|
10.1 |
1028 |
0012h |
March 2008 |
- Applies to USB cable model DLC9 and XUP Virtex®-II Pro Development System
only.
- Adds LED blinking for multiple cable management.
- Incorporates all features of 1027.
- Windows and Linux operating systems.
|
9.2i |
1301 |
0012h |
June 2007 |
- Applies to USB cable model DLC9G, DLC9LP and FX2LP based starter kits
(e.g., Spartan 3A FPGA Starter Kit, etc.).
- Adds fast cable firmware update. The cable’s CPLD updates in
approx. 5 seconds.
- Supports firmware overlay mechanism.
- Incorporates all features of 1025 and 1021.
- Windows and Linux operating systems.
|
9.2i |
1027 |
0012h |
June 2007 |
- Applies to USB cable model DLC9 and XUP Virtex-II Pro Development System
only.
- Modified to support firmware overlay mechanism.
- Incorporates all features of 1025 and 1021.
- Windows and Linux operating systems.
|
8.2i |
1025 |
0012h |
September 2006 |
- Supercedes version 1023
- Linux operating systems only
- Provides expanded support
for Linux 2.6.x kernels
- Incorporates all the features of 1023.
|
8.2i |
1023 |
0012h |
July 2006 |
- Obsolete
- Linux operating systems only
- Fixes a USB enumeraion problem
observed on some 2.6.x kernel. (see Xilinx
Answer Record 23541)
- Incorporates all the features of 1021
|
8.2i |
1021 |
0012h |
June 2006 |
This release includes further reduction of Erase, Program and
Verify (EPV) times:
- XCF00P by 50% (approx.)
- XCF00S by 60% (approx.)
- XC18V00 PROMs by 65% (approx.)
- CPLDs by 30% to 50% (approx.),
depending on family
|
7.1i SP2 |
1018 |
0006h |
April 2005 |
Significant algorithm improvements:
- Reduced programming time
for Platform Flash PROMs(XCF00P)
by 70%
- Reduced programming times for CPLDs between 15 and
50%, depending on family
Enhanced performance with Xilinx EDK
tools:
- MicroBlaze™ download times reduced ~500%
- PowerPC® download times
reduced ~5000%
- Debug latency (MicroBlaze and PowerPC) reduced ~500%
|
7.1i |
1017 |
0004h |
March 2005 |
Incorporates Version 1016 changes and synchronizes them with iMPACT Release Version 7.1i |
6.3i SP3 |
1016 |
0004h |
January 2005 |
This version is a Xilinx active internal release, can only be obtained
by contacting the Xilinx Hotline directly, and is compatible with
iMPACT Release Version 6.3.03i ONLY. It CANNOT be used with
later versions of iMPACT.
Also included are:
- Fixed a rare IDCODE error seen while running
iMPACT in batch mode
- Added auto-cable-disconnect function
- Fixed programming failures
seen with XC2V40 devices
|
