UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67733

Virtex UltraScale FPGA VCU1287 Characterization Kit - Reprogramming the Maxim Integrated Power Controllers

Description

The Virtex UltraScale FPGA VCU1287 Characterization Kit uses the MAX20751 and MAX15301 PMBus devices as part of the power supply system.

The MAX20751 device can be reprogrammed a limited number of times (4).

If power issues are encountered on the VCU1287, reprogramming these devices might become necessary, using the Maxim PowerTool cable.

Solution

To reprogram the power controllers on the board, the PowerTool MAXPOWERTOOL002# USB-to-PMBus interface dongle is needed, together with Maxim PowerTool Software.

The PowerTool Software can be downloaded here:

https://www.maximintegrated.com/en/design/software-description.html/swpart=SFW0005150H

Please find the script needed to reprogram the VCU1287 power controllers attached to this Answer Record.

Attachments

Associated Attachments

Name File Size File Type
UC1287_v01.xml 30 KB XML
AR# 67733
Date 12/20/2018
Status Active
Type General Article
Devices
  • Virtex UltraScale
Tools
  • Vivado Design Suite
Boards & Kits
  • Virtex UltraScale FPGA VCU1287 Characterization Kit
Page Bookmarked