Deprecation Notice: Support for ZCU102, ZCU102 DFX, and ZCU104 base platforms will end in upcoming releases. For details and migration guidance, refer to the Deprecation Notification Answer Record.
The following base platforms are added to Vitis Installer. You can use them directly after installing Vitis.
Embedded platform source files and build instructions can be found at AMD GitHub.
The ‘common image’ packages below contain a prebuilt Linux kernel and root file system that can be used with any Zynq™, Zynq™ MP or Versal board for embedded Vitis platform developers.
These files need to be copied to an SD flash card along with the platform specific boot image (boot.bin) available from the Vitis™ Embedded Platform page.
Also included is the ‘sysroot’ required for embedded Vitis platform application development. The sdk.sh script must to be used to setup the compressed Yocto Project SDK on a Linux development host properly.
Note: PetaLinux Tools installation is not necessary to use the common images. The licenses and sources used to create the common image content is provided below.
Versal common image (TAR/GZIP - 1.49 GB)
MD5 SUM Value : dabc1c112c8263b292968f4055e8dcac
Versal common target licenses and sources (TAR/GZIP - 4.07 GB)
MD5 SUM Value : 3ee233aded203c129b7f02357586169c
Versal common sysroot licenses and sources (TAR/GZIP - 3.7 GB)
MD5 SUM Value : dcbf7987e9462281ff24c9bee3ff77ae
ZYNQMP common image (TAR/GZIP - 2.36 GB)
MD5 SUM Value : 3d8a288d72ab14cc1086b5bb57dddfae
ZYNQMP common target licenses and sources (TAR/GZIP - 4.07GB)
MD5 SUM Value : 3f19761e0276b16de6eed95958f03878
ZYNQMP common sysroot licenses and sources (TAR/GZIP - 3.7 GB)
MD5 SUM Value : 0f941baeaa6b3c59f2406242b083c811